The IR100TA and IR100A, dedicated for analysis of either CO2, CO, or CH4, IR100TB and the IR100B, dedicated for simultaneous analysis of CO2 and CO, are available. The analyzers are easy to maintain and works steadily over long periods.
The ideal application of these analyzers are continuous measurement for the control and monitoring of combustion in various industrial furnaces as well as continuous measurement for the study of plants.Features
| * | Two available models: simultaneous dual-gas (CO and CO2) measurement model and single-gas dual-range measurement model |
| * | Stable operation over long periods |
| * | Influenced less by presence of another interfering gas |
| * | Easy maintenance |
| * | Wide variety of additional functions: self-diagnosis, simple calibration, automatic calibration, remote switching measuring range, and range identification |
Specifications
| Models |
| ||||
| Measuring principle | Non-dispersive infrared absorption, deflection method, single infrared-source, single-flux (single-beam) | ||||
| Sample gas conditions | Flowrate: 0.5 to 1 l/min Pressure: 500 Pa or more Temperature: 0 to +50 degC Dust: 100μg/Nm3 with the particle size of 1μm or less Mist: none Humidity: Avoid concentration. Corrosive gases sampled: NOx; 1000 ppm or less SO2; 1000 ppm or less HCl; 1 ppm or less Others; None | ||||
| Measuring gas component and measuring range | IR100A, IR100TA; single-gas dual-range analyzers CO2: 0-500ppm to 0-100% CO: 0-500ppm to 0-100% CH4: 0-1000ppm to 0-100% IR100B, IR100TB; dual-gas dual-range analyzers CO2: 0-500ppm to 0-100% CO: 0-500ppm to 0-100% | ||||
| Output signals | Output 1: 0 to 1V DC, non-isolated, linearized output signals Output 2: 4 to 20mA (maximum allowable load resistance: 550 Ω), simultaneous, non-isolated, linearized signals | ||||
| Ambient temperature | -5 to 45 degC | ||||
| Ambient humidity | 90%RH or less | ||||
| Installation | Indoor | ||||
| Weights | Approx. 12kg | ||||
| Power supply | 100V AC, 115 V AC, 220 V AC(±10％)、50/60Hz |
Features
| * | Two available models: simultaneous dual-gas (CO and CO2) measurement model and single-gas dual-range measurement model |
| * | Stable operation over long periods |
| * | Influenced less by presence of another interfering gas |
| * | Easy maintenance |
| * | Wide variety of additional functions: self-diagnosis, simple calibration, automatic calibration, remote switching measuring range, and range identification |
No comments:
Post a Comment